+- Vgate Forums (https://forum.vgatemall.com)
+-- Forum: APPS (https://forum.vgatemall.com/forumdisplay.php?fid=8)
+--- Forum: Bimmercode APP Android&iOS (https://forum.vgatemall.com/forumdisplay.php?fid=9)
+--- Thread: About using bimmerlink to trigger an alarm solution after a BMW has been switched off (/showthread.php?tid=140)
About using bimmerlink to trigger an alarm solution after a BMW has been switched off - Aqun - 05-16-2023
Hello
I have vlinker BM+ I noticed this problem
car is BMW F40 2022
if I leave connected on car after I do some operation like scan parameter ecc with bimmerlink
I close app disconnect and when I close car it trigger stock alarm ,if make obd scan with ista
say on memory "alarm was activated by diagnostic can disturbation"
if I don't use or disconnect and reconnect vlinker before closing car it not triggering alarm
It looks like the car detects when I leave it connected.I also tried to update last fw with vgate app but do the same,do you have any tips I can do? or need to keep disconnected and use when needed?
thanks
RE: About using bimmerlink to trigger an alarm solution after a BMW has been switched off - admin - 05-16-2023
(05-16-2023, 02:45 AM)Aqun Wrote: HelloPlease check the firmware at https://www.vgatemall.net/downloadcenter下载vLinker_BM_V2.2.83.beta1. This version of the firmware has been specifically modified to solve your problem.
I have vlinker BM+ I noticed this problem
car is BMW F40 2022
if I leave connected on car after I do some operation like scan parameter ecc with bimmerlink
I close app disconnect and when I close car it trigger stock alarm ,if make obd scan with ista
say on memory "alarm was activated by diagnostic can disturbation"
if I don't use or disconnect and reconnect vlinker before closing car it not triggering alarm
It looks like the car detects when I leave it connected.I also tried to update last fw with vgate app but do the same,do you have any tips I can do? or need to keep disconnected and use when needed?
thanks
In the near future the Bimmerlink app developers will modify the app and close the open protocol when the app exits and connects to BM to fix this issue.
As it takes time to modify the application, we have prioritised modifying this firmware for you to use first.
Please download the upgrade tool from the following website and use a Windows PC to upgrade.