+- Vgate Forums (https://forum.vgatemall.com)
+-- Forum: Vgate OBD (https://forum.vgatemall.com/forumdisplay.php?fid=28)
+--- Forum: vLinker Series (https://forum.vgatemall.com/forumdisplay.php?fid=30)
+---- Forum: Vgate vLinker FS USB (https://forum.vgatemall.com/forumdisplay.php?fid=37)
+---- Thread: Chip used (ELM vs OBDsol) (/showthread.php?tid=46)
Chip used (ELM vs OBDsol) - telium - 01-20-2023
What chip is used in the vLinker FS USB?
I'm looking for a USB connected OBD adaptor based on the STN2120 chip produced by OBDsol
I would also like to suggest you add this info to your website...there are lots of cheap adaptors using ELM327 clones and it's hard to figure out which adaptors are higher quality
RE: Chip used (ELM vs OBDsol) - admin - 02-01-2023
[quote pid="72" dateline="1674222380"]
teliumWhat chip is used in the vLinker FS USB?
I'm looking for a USB connected OBD adaptor based on the STN2120 chip produced by OBDsol
I would also like to suggest you add this info to your website...there are lots of cheap adaptors using ELM327 clones and it's hard to figure out which adaptors are higher quality
[/quote]
Hello
1. The chip we use is not the STN2120, as the chips used by each company are very different.
2. Our vLinker FS USB can be programmed in the Ford with a programming voltage of 18v and the FS USB achieves a transfer rate of 3Mpbs and a maximum baud rate of 3Mhz. Support for USB 2.0 ports
3.The vLinker MC+ supports Android as well as iOS and Windows, it can automatically hibernate and wake up the vehicle when it is started, program the car, monitor live data and much more.
RE: Chip used (ELM vs OBDsol) - telium - 02-01-2023
Could you tell me what chip you do use?
RE: Chip used (ELM vs OBDsol) - admin - 02-03-2023
(02-01-2023, 01:36 PM)telium Wrote: Could you tell me what chip you do use?
The chip used in our vLinker FS USB is the FT230XS.
RE: Chip used (ELM vs OBDsol) - steve labonte - 12-20-2023
(02-03-2023, 01:56 AM)admin Wrote:(02-01-2023, 01:36 PM)telium Wrote: Could you tell me what chip you do use?
The chip used in our vLinker FS USB is the FT230XS.
I think he was reffering to the chip that did the obd2 comunicating not the usb interface chip, example elm 327 etc.I think it may be a STN1170
RE: Chip used (ELM vs OBDsol) - admin - 12-21-2023
(12-20-2023, 08:00 AM)steve labonte Wrote:(02-03-2023, 01:56 AM)admin Wrote:(02-01-2023, 01:36 PM)telium Wrote: Could you tell me what chip you do use?
The chip used in our vLinker FS USB is the FT230XS.
I think he was reffering to the chip that did the obd2 comunicating not the usb interface chip, example elm 327 etc.I think it may be a STN1170
Sorry, I may have misunderstood, the elm 327 version for USB is 2.3