+- Vgate Forums (https://forum.vgatemall.com)
+-- Forum: Vgate OBD (https://forum.vgatemall.com/forumdisplay.php?fid=28)
+--- Forum: vLinker Series (https://forum.vgatemall.com/forumdisplay.php?fid=30)
+---- Forum: Vgate vLinker FD/FD+/FD WiFi (https://forum.vgatemall.com/forumdisplay.php?fid=35)
+---- Thread: AT Commands for Baud Rates??? (/showthread.php?tid=7929)
AT Commands for Baud Rates??? - tjshadyluver - 09-18-2024
I'm developing my own application and I got it working great with HS-CAN on pins 6 and 14 with "AT SP 6" but my next task is SWCAN or GMLAN for GM and MSCAN for Ford. I've been searching like crazy how to setup the vLinker to be able to talk to 33.3kbps on pin 1. There has to be an AT or ST command to send to make that work. Also MSCAN on many Ford Modules. Some are 125k 250k and 500k baud but on pins 3 and 11. I'm only able to talk to 500k HSCAN. Any PM or Ideas would greatly appreciated!
RE: AT Commands for Baud Rates??? - admin - 09-18-2024
(09-18-2024, 05:01 AM)tjshadyluver Wrote: I'm developing my own application and I got it working great with HS-CAN on pins 6 and 14 with "AT SP 6" but my next task is SWCAN or GMLAN for GM and MSCAN for Ford. I've been searching like crazy how to setup the vLinker to be able to talk to 33.3kbps on pin 1. There has to be an AT or ST command to send to make that work. Also MSCAN on many Ford Modules. Some are 125k 250k and 500k baud but on pins 3 and 11. I'm only able to talk to 500k HSCAN. Any PM or Ideas would greatly appreciated!
Please contact support@vgate.com.cn and he will answer your questions!