Constant disconnection problem - Printable Version +- Vgate Forums (https://forum.vgatemall.com) +-- Forum: Vgate OBD (https://forum.vgatemall.com/forumdisplay.php?fid=28) +--- Forum: vLinker Series (https://forum.vgatemall.com/forumdisplay.php?fid=30) +---- Forum: Vgate vLinker FS USB (https://forum.vgatemall.com/forumdisplay.php?fid=37) +---- Thread: Constant disconnection problem (/showthread.php?tid=6858) |
Constant disconnection problem - Tux2609 - 08-22-2024 I just got my cable, installed drivers, updated firmware, configured forscan settings and then when I try connecting to car I either get "no adapter found" or it connects to the car, reads modules and then disconnects and shows the same message. If I unplug and plug in again sometimes it finds it again but looses connection very quickly. I don't know what else to try. RE: Constant disconnection problem - admin - 08-23-2024 (08-22-2024, 08:26 AM)Tux2609 Wrote: I just got my cable, installed drivers, updated firmware, configured forscan settings and then when I try connecting to car I either get "no adapter found" or it connects to the car, reads modules and then disconnects and shows the same message. If I unplug and plug in again sometimes it finds it again but looses connection very quickly. I don't know what else to trHello Can you record a video and send it to my email? support@vgate.com.cn RE: Constant disconnection problem - fluffie - 09-03-2024 (08-23-2024, 02:34 AM)admin Wrote:(08-22-2024, 08:26 AM)Tux2609 Wrote: I just got my cable, installed drivers, updated firmware, configured forscan settings and then when I try connecting to car I either get "no adapter found" or it connects to the car, reads modules and then disconnects and shows the same message. If I unplug and plug in again sometimes it finds it again but looses connection very quickly. I don't know what else to trHello Any updates on this one? I have the exact same issues. Connected to vehicle, forscan finds 1 or 2 modules, disconnects. RE: Constant disconnection problem - admin - 09-04-2024 (09-03-2024, 04:41 PM)fluffie Wrote:It may be because the USB port is too loose resulting in poor contact, you can try to connect to another USB port(08-23-2024, 02:34 AM)admin Wrote:(08-22-2024, 08:26 AM)Tux2609 Wrote: I just got my cable, installed drivers, updated firmware, configured forscan settings and then when I try connecting to car I either get "no adapter found" or it connects to the car, reads modules and then disconnects and shows the same message. If I unplug and plug in again sometimes it finds it again but looses connection very quickly. I don't know what else to trHello RE: Constant disconnection problem - brunomsveloso - 09-11-2024 Hi , today when I upgraded forscan for an extended license I could stop using my Vgate Vlinker FS USB cable and the picture errors below appears RE: Constant disconnection problem - admin - 09-12-2024 (09-11-2024, 10:03 PM)brunomsveloso Wrote: Hi , today when I upgraded forscan for an extended license I could stop using my Vgate Vlinker FS USB cable and the picture errors below appears Hello. Did you fail to update before? 1. After the update failed, please power off the product and update again, otherwise it will keep failing, unplug the product from the car as well as the USB port 2. During the update, the product only needs to be connected to the USB port of the computer, not to the car, if you connect the device to the car, then it will also cause the update to fail. RE: Constant disconnection problem - vvss12 - 10-14-2024 Hi. I have the same problem, after updating forscana, the cable stopped connecting. RE: Constant disconnection problem - admin - 10-15-2024 (10-14-2024, 04:58 PM)vvss12 Wrote: Hi. You can also download the update file for the vLinker FS USB in the same way at www.vgatemall.com, bring the device back up to date and it will be back to normal! |