-
How to connect vLinker FD+ BT with PC under Windows
mulaluma > 05-09-2023, 09:26 AM
Hi,
I recently bought the vLinker adapter FD+ BT3.0/BLE4.0 - for Android & iOS & Windows.
When I try to connect my PC with the vLinker module via BT it only shows vLinker Android or vLinker iOS available in the BT connections of my PC, so I cannot connect to the vLinker directly.
When I open forscan, it connects the vLinker via Android connection with my PC.
Is there any special setting to link the adapter directly with my PC or does it only work via forescan in Auto mode, due to the fact, that the data transfer under the auto setting is very slow.
Some settings would be very helpful, as in the Manual ther is only Android and iOS connection discribed, also on the websites.
Thank you in advance. -
RE: How to connect vLinker FD+ BT with PC under Windows
admin > 05-10-2023, 02:18 AM
Hello
When connecting to FORScan windows, there are three connection types:
1. Choose COM for the connection type: you need to connect vLinekr FD-Android in Bluetooth and check the COM port number of vLinker FD-Android, then open the FORScan app and set the COM port number to connect
2. Select Bluetooth as the connection type: open the FORScan application and select Bluetooth connection, select vLinekr FD-Android in Bluetooth connection and establish the connection
3. Choose Auto for connection type, it will apply all your COM port number to establish connection, if there is a device response in the middle, then it will connect with the responding device -
RE: How to connect vLinker FD+ BT with PC under Windows
mulaluma > 05-10-2023, 03:34 PM
(05-10-2023, 02:18 AM)admin Wrote: Hello
When connecting to FORScan windows, there are three connection types:
1. Choose COM for the connection type: you need to connect vLinekr FD-Android in Bluetooth and check the COM port number of vLinker FD-Android, then open the FORScan app and set the COM port number to connect
2. Select Bluetooth as the connection type: open the FORScan application and select Bluetooth connection, select vLinekr FD-Android in Bluetooth connection and establish the connection
3. Choose Auto for connection type, it will apply all your COM port number to establish connection, if there is a device response in the middle, then it will connect with the responding device
Thank you very much for your quick response. I was not sure, if vLinker FD-Android was the right connection. So I will go ahead and do it like this. -
RE: How to connect vLinker FD+ BT with PC under Windows
admin > 05-13-2023, 02:29 AM
(05-10-2023, 03:34 PM)mulaluma Wrote:
(05-10-2023, 02:18 AM)admin Wrote: Hello
When connecting to FORScan windows, there are three connection types:
1. Choose COM for the connection type: you need to connect vLinekr FD-Android in Bluetooth and check the COM port number of vLinker FD-Android, then open the FORScan app and set the COM port number to connect
2. Select Bluetooth as the connection type: open the FORScan application and select Bluetooth connection, select vLinekr FD-Android in Bluetooth connection and establish the connection
3. Choose Auto for connection type, it will apply all your COM port number to establish connection, if there is a device response in the middle, then it will connect with the responding device
Thank you very much for your quick response. I was not sure, if vLinker FD-Android was the right connection. So I will go ahead and do it like this.
Hello
If you are not satisfied with the way the application is connected, you can contact the application developer and give your opinion -
RE: How to connect vLinker FD+ BT with PC under Windows
bukarim > 04-14-2025, 01:34 AM
(05-09-2023, 09:26 AM)mulaluma Wrote: Hi,
I recently bought the vLinker adapter FD+ BT3.0/BLE4.0 - for Android & iOS & Windows.
When I try to connect my PC with the vLinker module via BT it only shows vLinker Android or vLinker iOS available in the BT connections of my PC, so I cannot connect to the vLinker directly.
When I open forscan ragdoll archers, it connects the vLinker via Android connection with my PC.
Is there any special setting to link the adapter directly with my PC or does it only work via forescan in Auto mode, due to the fact, that the data transfer under the auto setting is very slow.
Some settings would be very helpful, as in the Manual ther is only Android and iOS connection discribed, also on the websites.
Thank you in advance.
I searched for the FD Android connection source, it has several types of device ports and connects to other news sources.
You can choose "Settings" and change your connection. -
RE: How to connect vLinker FD+ BT with PC under Windows
peersnarling > 04-22-2025, 02:06 AM
(05-10-2023, 02:18 AM)admin Wrote: Hello
When connecting to FORScan windows, there are three connection types:
1. Choose COM for the connection type: you need to connect vLinekr FD-Android in Bluetooth and check the COM port number of vLinker FD-Android, then open the FORScan app and set the COM port number to connect
2. Select Bluetooth as the connection type: open the FORScan application and select Bluetooth google baseball connection, select vLinekr FD-Android in Bluetooth connection and establish the connection
3. Choose Auto for connection type, it will apply all your COM port number to establish connection, if there is a device response in the middle, then it will connect with the responding device
Which of these 3 connection methods is the best and most recommended? -
RE: How to connect vLinker FD+ BT with PC under Windows
admin > 04-24-2025, 02:27 AM
(04-22-2025, 02:06 AM)peersnarling Wrote:
You can use the COM port connection, and the connection method does not affect the usage effect.(05-10-2023, 02:18 AM)admin Wrote: Hello
When connecting to FORScan windows, there are three connection types:
1. Choose COM for the connection type: you need to connect vLinekr FD-Android in Bluetooth and check the COM port number of vLinker FD-Android, then open the FORScan app and set the COM port number to connect
2. Select Bluetooth as the connection type: open the FORScan application and select Bluetooth google baseball connection, select vLinekr FD-Android in Bluetooth connection and establish the connection
3. Choose Auto for connection type, it will apply all your COM port number to establish connection, if there is a device response in the middle, then it will connect with the responding device
Which of these 3 connection methods is the best and most recommended? -
RE: How to connect vLinker FD+ BT with PC under Windows
thunder33 > 04-25-2025, 01:30 AM
Is there any special settings to link the adapter directly to my PC speed stars or does it only work via forescan in Auto mode, due to the fact that, data transfer in auto settings is very slow. -
RE: How to connect vLinker FD+ BT with PC under Windows
textnow > 07-16-2025, 12:05 PM
While working on diagnostics, staying connected helps — TextNow APK is great for free calls and texts without needing a SIM card.