Hi, I have an iCar Pro BLE Bluetooth 4.0, but the Bluetooth doesn’t appear on two of my Android phones and two iOS devices. The module itself has both red and blue lights on. I tried updating the firmware using iOS without connecting to Bluetooth as advised by the officials, but the VgateFwUpdate tool always shows 'Can’t connect to device.' Anyone encountered this before?

(03-08-2025, 02:59 AM)fkc0630 Wrote: Hi, I have an iCar Pro BLE Bluetooth 4.0, but the Bluetooth doesn’t appear on two of my Android phones and two iOS devices. The module itself has both red and blue lights on. I tried updating the firmware using iOS without connecting to Bluetooth as advised by the officials, but the VgateFwUpdate tool always shows 'Can’t connect to device.' Anyone encountered this before?

iCar Pro 4.0 in iOS, can't find Bluetooth in the settings, can only set up BLE connection within the APP!

Make sure you're using the app to pair and update the device. If you continue to see the "Can't connect to device" error, try restarting both the device and your phone, ensuring both are within range, and follow the app's instructions carefully. brain lines game

If you're facing the "Can't connect to device" error, make sure you're using the app to pair and update your device. Restart both the device and your phone, keeping them within range, and carefully follow the app's instructions. It's like Drift Boss – sometimes, a quick restart and focus are all you need to get back on track!

(03-08-2025, 02:59 AM)fkc0630 Wrote: Hi, I have an rice purity test iCar Pro BLE Bluetooth 4.0, but the Bluetooth doesn’t appear on two of my Android phones and two iOS devices. The module itself has both red and blue lights on. I tried updating the firmware using iOS without connecting to Bluetooth as advised by the officials, but the VgateFwUpdate tool always shows 'Can’t connect to device.' Anyone encountered this before?

I ran into a similar headache with my iCar Pro BLE not showing up on my Android phone and iPad—lights were on, but no Bluetooth signal. I reset the module by unplugging it for a minute and cleared the Bluetooth cache on my phone. For you, try restarting all your devices after clearing the Bluetooth cache, and make sure the VgateFwUpdate app is the latest version from the app store.

Try resetting the iCar Pro and ensure Bluetooth permissions are enabled Crazy Cattle 3D Also, use a different device for the firmware update.

(03-08-2025, 02:59 AM)fkc0630 Wrote: Hi, I have an iCar Pro BLE Bluetooth 4.0, but the Bluetooth doesn’t appear on two of my Android phones and two iOS devices. The module itself has both red and blue lights on. I tried updating the firmware moto x3m using iOS without connecting to Bluetooth as advised by the officials, but the VgateFwUpdate tool always shows 'Can’t connect to device.' Anyone encountered this before?

I’m facing the exact same issue—red and blue lights are on, but no Bluetooth detection on Android or iOS. Tried the iOS firmware update tool too, but it just says "Can’t connect to device." Super frustrating!

It sounds frustrating that your iCar Pro BLE isn't being detected by your devices. Here are a few suggestions you might try:
Reset the Device: Sometimes a simple reset can resolve connectivity issues. Check the manual for instructions on how to reset your iCar Pro.
Check Bluetooth Settings: Ensure that Bluetooth is enabled on your phones and that they are in pairing mode.
Firmware Update: Since you're having trouble with the VgateFwUpdate tool, make sure you're using the latest version of the app. If possible, try updating on a different device or network.
Compatibility: Double-check that your devices are compatible with Bluetooth 4.0.
If none of these work, you might want to reach out to the manufacturer's support for further assistance. Good luck!

crazy cattle 3d