There are two firmware: iCarPro_V4.0.0X and iCarPro_V4.1.10.
1. Because the vgate brand has been around for many years, some long ago products have lower versions, so you need to upgrade with iCarPro_V4.0.0X and then with iCarPro_V4.1.10, so your iCar Pro is the latest version.
2. If your iCar Pro is recently purchased, then you can directly use iCarPro_V4.1.10.
1. Connect the vLinker MC+ to the car's OBD plug.
2. The blue LED blinks slowly
3. Then press the Bind button. Blue LED blinks faster
4. Open the BT connection manager of your Android phone and start searching
5. Only vLinker MC-IOS is in the available devices
6. Continue to wait for a while and vLinker MC-Android will appear in the available devices
Yes, you need to install the driver before the computer can detect the USB serial port of vlinker FS.
You can download the vlinker FS zip file at https://www.vgatemall.com/downloadcenter/
which contains the FS driver
Posted by: admin - 11-28-2022, 02:21 AM - Forum: More APP
- No Replies
Because some of the car host Bluetooth may only do HID or headset service, our device is SPP service, the protocol is not consistent, so it can not be used with.
Note: I am using icar pro 4.0, the Bluetooth name varies from product model to product model, just choose the Bluetooth name of the purchased product
1. Open the windows update application ''vlinkerFwUpdater''
2.Connect Android-Vlink Bluetooth device
3. Check the Bluetooth port number and fill in the upgrade application, baud rate: 38400
4. Select the file of the upgrade version
5. power cycle the device to work after the update is completed *If the upgrade fails, power cycle the device and upgrade again.
The update file as well as ''vlinkerFwUpdater'' are available at www.vgatemall.com
vgate All WiFi products are inaccessible!
The iCar2 WIFI module works in AP mode, which is equivalent to a router. If you
login to 192.168.0.10, the WIFI module will switch to STA mode and
then your computer will not be able to find a connection to the ICAR.
1. Download the installation file corresponding to the product
2.Unzip the file after downloading
3.Open the vlinker Fw updater in the extracted file
4. Connect vlinker FD+ Bluetooth, if it is vlinker series or icar series other models, download the corresponding file and connect the corresponding product can be
5. Check the vlinker FD+ port number, and fill in the port number into the upgrade software, baud rate: 38400
6. Select the vlinker FD+ update file.
7. Click update and wait for the update to complete
