I got the iCar II connected via Bluetooth to my android head unit, and I paired it no problems at all; Works perfectly with torque and car doctor.

The issue that I’m facing is that when I park the car and shut-off the engine, the connection breaks when I re-start the car.

I have to unplug the OBD and re-plug it again and unpair and re-pair again with BT.


1. When you park and turn off the engine for a period of time icar II will go into hibernation mode, when hibernating it will consume less power, when you need to wake him up you can use the button on icar II to wake up, it doesn't need to be unplugged again.

2. icar Pro and vlinker series with auto wake function, which recognises the voltage of the vehicle when you start it and automatically wakes up the connection

merhaba. Herkese iyi günler.
Vgate vs 890 hafıza kartında rom gerekiyor. Sanırım vgate'imdeki dil dosyaları bozuk.
Yazılar karıştı.
Yardımcı olabileceklere saygılarımı iletmek isterim.

Carista APP is supported for all vgate series to connect and use

However, only vLinker MC+ is available in the Carista app when selecting a device, as shown in the picture：
   

Select the vLinker MC+ option directly from this selection to connect

It will automatically recognize all vgate Bluetooth products and pair with it

vLinker MC WIFI module works in AP mode, which is equivalent to a router.

If you login to 192.168.0.10, the WIFI module will switch to STA mode.

Then your computer will not be able to find a connection to the vLinker MC WiFi.

In iCarPro_V4.1.10.rar https://www.vgatemall.com/downloadcenter/

There are two firmware: iCarPro_V4.0.0X and iCarPro_V4.1.10.

1. Because the vgate brand has been around for many years, some long ago products have lower versions, so you need to upgrade with iCarPro_V4.0.0X and then with iCarPro_V4.1.10, so your iCar Pro is the latest version.

2. If your iCar Pro is recently purchased, then you can directly use iCarPro_V4.1.10.

1. Connect the vLinker MC+ to the car's OBD plug.
2. The blue LED blinks slowly
3. Then press the Bind button. Blue LED blinks faster
4. Open the BT connection manager of your Android phone and start searching
5. Only vLinker MC-IOS is in the available devices
6. Continue to wait for a while and vLinker MC-Android will appear in the available devices

1.The Bluetooth system of some Android car phones is not mature, so it can't connect with vlinker MC Bluetooth.

2. You can configure the connection by downloading the third-party Bluetooth software, link: https://play.google.com/store/apps/detai...uetoothBox

Yes, you need to install the driver before the computer can detect the USB serial port of vlinker FS.
You can download the vlinker FS zip file at https://www.vgatemall.com/downloadcenter/
which contains the FS driver

Because some of the car host Bluetooth may only do HID or headset service, our device is SPP service, the protocol is not consistent, so it can not be used with.

Note: I am using icar pro 4.0, the Bluetooth name varies from product model to product model, just choose the Bluetooth name of the purchased product

1. Open the windows update application ''vlinkerFwUpdater''
   
2.Connect Android-Vlink Bluetooth device
   
3. Check the Bluetooth port number and fill in the upgrade application, baud rate: 38400
   
4. Select the file of the upgrade version
   
5. power cycle the device to work after the update is completed *If the upgrade fails, power cycle the device and upgrade again.
   

The update file as well as ''vlinkerFwUpdater'' are available at    www.vgatemall.com